Accessing User Tools (System Settings); Changing Default Settings - Ricoh Aficio 240W Operating Instructions Manual

Accessing User Tools (System Settings)

This section is for key operators in
charge of this machine.
User Tools allow you to change or set
defaults.
Note
❒ Operations for System Settings dif-
fer from normal operations. Al-
ways quit User Tools when you
finish making settings. See p.32
"Exiting User Tools".
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the { { { { Energy
Saver} } } } or { { { { Clear Modes} } } } key is
pressed.

Changing Default Settings

Note
❒ If a key operator code is set, the
key operator code entry display
appears. Enter the key operator
code, and then press [OK]. See p.43
"Key Operator Code".
A A A A
Press the { { { { User Tools} } } } key.
The indicator lights.
Accessing User Tools (System Settings)
B B B B
Press the number key { { { { 1} } } } .
The System Settings display ap-
pears.
C C C C
Enter the number of the menu
you want to select using the
number keys.
Reference
p.29 "User Tools Menu (System
Settings)"
D D D D
Enter the number of the item you
want to select using the number
keys.
Note
❒ Press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next] to select
an item not displayed.
E E E E
Change settings by following in-
structions on the display, and
then press [OK].
Note
❒ For details about specifying, or
changing settings, see p.19 "Dis-
play".
❒ To cancel changing settings and
return to the initial display,
press the { { { { Use Tools} } } } key.
ABB001S
3
31