System Settings 2 / 5 - Ricoh 9922DP System Settings

User Tools (System Settings)
System Settings
Menu
05. Function Reset
2
06. Panel Off Timer
07. Energy Saver Level
08. Energy Saver Timer The machine enters Low Power mode automatically after
18
2
/
5
Description
How long the machine waits before switching to the default
mode if no operation has been performed after an operation
has finished. The time can be set from 3 to 60, or Instant.
Note
Default: 10 seconds
The machine enters to Panel Off mode automatically after
your job is finished, after the selected time. The time can be
set from 10 to 999 seconds, or off.
Note
Default: On (60 seconds)
You can select the Energy Saver level.
Level 1
• Power Consumption:
Reduced by about 40% compared standby mode.
• Warm-Up Time:
about 15 seconds
Level 2
• Power Consumption:
Reduced by about 60% compared standby mode.
• Warm-Up Time
less than 30 seconds
This value applies to Type 1 (Copier features only).
Note
Default: Level 1
your job is finished, after the selected time. The time can be
set from 1 to 240 minutes.
In Low Power mode, power consumption is reduced by
30% compared with Standby mode. This value applies to
Type 1 (Copier features only).
Note
Default: 15 minutes