Table of Contents
Advertisement
Sending Stored Scan Data by E-mail
When selecting a destination
from the list
A Press the title for the desired
destination. The destinations
for that title are displayed.
If the desired destination is not
displayed, press [U U U U ] or [T T T T ] to
display the destination.
Note
❒ The destination titles are pro-
grammed in the delivery
server.
6
B Select the destination to which
the scan data is to be sent.
The selected destination is high-
lighted and also appears in the
destination field at the top of the
screen. A line appears over the
title of the category to which the
destination belongs.
Note
❒ To deselect a destination,
press the destination once
more, or press [U U U U Prev.] or
[T T T T Next] to bring up the desti-
nation in the destination
field, and then press [Clear].
C To select more destinations, re-
peat step B B B B .
68
Using a short ID number to select
a destination
A Press [Registration No.].
B Use the number keys to enter
the 5-digit ID number that has
been assigned to a destination.
If the entered number is less
than 5 digits long, press the { { { { #} } } }
key after the last number.
Example:
To enter 00003
Press the { { { { 3} } } } key and then the
{ { { { #} } } } key using the number keys.
The destination corresponding
to the short ID number appears
in the destination field at the top
of the screen.
Note
❒ To deselect a destination,
press [U U U U Prev.] or [T T T T Next] to
display the destination in the
destination field, and then
press [Clear].
C To select more destinations, re-
peat step B B B B .
Manual input of the e-mail
address
A Press [Manual Input].
The soft keyboard appears to
enter the e-mail address.
Advertisement
Table of Contents
