Names And Functions Of Components; Control Panel - Savin 1232 Scanner Reference

Names and Functions of Components

This section explains the names and functions of various controls used to oper-
ate the scanner.

Control Panel

This illustration shows the product with options installed.
The { { { { User Tools/Counter} } } } key
1.
Use to change default values or operation
parameters according to the operating
conditions.
2.
Display
Shows operation status and various mes-
sages.
The { { { { Check Modes} } } } key
3.
Press to check the current settings.
The { { { { Clear Modes} } } } key
4.
Use to cancel settings.
The { { { { Energy Saver} } } } key
5.
Press this key for about one second to be-
gin warm-up.
Pressing this key again while in warm-up
mode cancels warm-up.
Note
❒ This key is inactive while scanning or
setting scanner default values.
Names and Functions of Components
6.
Main power indicator, power in-
dicator
The main power indicator lights up when
the main power switch is set to On. The
power indicator lights up when this ma-
chine is on.
Important
❒ Do not turn off the main power
while the power indicator is blink-
ing. Doing so may cause a failure
of the hard disk.
7.
Operation Switch
Pressing this switch turns the machine
on. The power indicator lights up. To
turn the machine off, press this switch
again.
Note
❒ This key is inactive while setting scan-
ner default values.
1
ZHFS010N
11