Table of Contents
Advertisement
Delivering Stored Scan Data by the Network Delivery Scanner
D Enter part of the destination
name.
Note
❒ Enter the first character or
characters of the destination
name.
E Press [OK].
A list of destination names
found is displayed.
F Select a destination.
5
G Press [Exit].
H Press [OK].
The destination name appears
in the destination field at the top
of the screen.
Manual input of a destination
Note
❒ When using ScanRouter V2 Pro-
fessional, it is possible to enter
the destination e-mail address
directly.
A Press [Manual Input].
The soft keyboard is displayed
to enter a destination.
58
B Enter the destination with the
soft keyboard.
Note
❒ Enter the e-mail address of
the destination when send-
ing via the delivery server.
❒ It is possible to use alphabets,
numbers and periods. The
symbols ()\,;:" cannot be
used.
For more information to enter
an e-mail address, see the Gen-
eral Settings Guide.
C Press [OK].
The name of the destination ap-
pears in the destination display
area on the upper side of the
screen.
Note
❒ Press [U U U U Prev.] or [T T T T Next] to
select the destination.
❒ Pressing the { { { { Check Modes} } } }
key lets you verify the select-
ed destinations.
D To enter more than one desti-
nation, repeat steps A A A A to C C C C .
Checking selected destinations
A Use the destination field at the
top of the screen to check which
destinations are selected.
Note
❒ When multiple destinations
are selected, the selected des-
tinations are displayed in or-
der they were selected by
pressing [U U U U Prev.] or [T T T T Next].
Advertisement
Table of Contents
