Walkup Screen Setting - Toshiba e-studio182 Operator's Manual

Walkup Screen Setting

This section describes how to set the screen when the power of the equipment is turned ON. In
the initial screen set at the time of shipping, the "copy mode" main screen is displayed.
1
Press the [USER FUNCTIONS] button.
The "user functions mode" main screen is displayed.
2
Select "DEFAULT SETTINGS" with
press the [ENTER] button.
USER FUNCTIONS
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
3
Select "GENERAL SETTING" with
press the [ENTER] button.
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
4
Select "WALKUP SCREEN" with
press the [ENTER] button.
GENERAL SETTING
01.DRAWER SIZE
02.WALKUP SCREEN
03.TIMERS
and buttons, and then
1216
and buttons, and then
and buttons, and then

Walkup Screen Setting

125