Walkup Screen Setting - Toshiba e-studio 165 Operator's Manual

5 CHANGING EQUIPMENT'S SETTINGS

Walkup Screen Setting

This section describes how to set the screen when the power of the equipment is turned ON. In
the initial screen set at the time of shipping, the "copy mode" main screen is displayed.
1
Press the [USER FUNCTIONS] button.
The "user functions mode" main screen is displayed.
2
Select "DEFAULT SETTINGS" with
press the [ENTER] button.
USER FUNCTIONS
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
3
Select "GENERAL SETTINGS" with
press the [ENTER] button.
DEFAULT SETTINGS
01.GENERAL SETTINGS
02.COPY SETUP
03.FAX SETUP
4
Select "WALKUP SCREEN" with
press the [ENTER] button.
GENERAL SETTINGS
01.DRAWER SIZE
02.WALKUP SCREEN
03.TIMERS
126

Walkup Screen Setting

and buttons, and then
1216
and buttons, and then
and buttons, and then