Chapter 8 Specifications And Options; E-Studio182/212/242 Specifications - Toshiba e-studio182 Operator's Manual

8 SPECIFICATIONS AND OPTIONS

e-STUDIO182/212/242 Specifications

Model name
Type
Original glass
Printing (copying) system
Developing system
Fusing method
Photosensor type
Original scanning system
Original scanning sensor
Scanning light source
Resolution
Acceptable originals
Acceptable original size
Acceptable copy
paper size
Acceptable copy
paper weight
Warm-up time
First copy time (LT portrait)
Continuous copy speed
Multiple copying
Excluded image
width
Reproduction ratio
Storage capacity
Paper supply
Loading capacity for the receiving
tray
Toner density adjustment
Exposure control
Memory
USB interface
Environment (for normal use)
Power requirements
Dimensions (equipment only)
Power consumption
Weight (equipment including drum)
Space occupied (equipment only)
These specifications vary depending on the copying conditions and the environment.
Specifications and appearance are subject to change without notice in the interest of product
improvement.
212

e-STUDIO182/212/242 Specifications

DP-1830/2120/2420
Desktop type
Fixed
Indirect electrophotographic method
2-component magnetic brush developing
2 halogen lamps
OPC
Flat surface scanning system
(When the Reversing Automatic Document Feeder / Automatic
Document Feeder is installed: Fixed scanning system by feeding
the original)
Linear CIS sensor
LED
Scanning 600 dpi x 600 dpi
Writing 2400 dpi x 600 dpi (Smoothing process)
Sheets, books and 3-dimensional objects
Max. LD
Drawer LD, LG, LT, LT-R, COMP, 13"LG, A3, A4, A4-R, B4, B5, B5-R,
FOLIO
Bypass LD, LG, LT, LT-R, ST-R, COMP, 13"LG, A3, A4, A4-R, A5-R, B4, B5,
B5-R, FOLIO
Drawer 17 - 20 lb. Bond
Bypass 17 - 20 lb. Bond (for continuous feed)
13 lb. Bond - 90 lb. Index (for single feed)
17 - 20 lb. Bond (When the Automatic Duplexing Unit is used.)
Approx. 25 seconds
Approx. 7.7 seconds (e-STUDIO182/212), Approx. 7.5 seconds
(e-STUDIO242)
See P.213 "Continuous copying speed"
Up to 999 copies (digital key entry)
Copy Leading edge: 0.12"±0.08", Trailing edge: 0.08"±0.08",
Both edges: 0.08"±0.08"
Printer Leading edge: 0.20"±0.08", Trailing edge: 0.20"±0.08",
Both edges: 0.20"±0.08"
Actual size 100±0.5%
Zoom 25 - 200% (in 1% increments)
Max. 250 sheets or until the memory is full (TOSHIBA's own chart)
Drawer 250 sheets (20 lb. Bond)
Bypass 100 sheets (20 lb. Bond)
Approx. 250 sheets (17 lb. Bond)
Magnetic auto-toner system
Automatic plus manual selection from 7 exposure steps
Page memory: 112 MB
USB2.0 (Hi-Speed)
Temperature: 10 º - 30 ºC (50 º - 86 ºF), Humidity: 20 - 85% (No
condensation)
115 V±10%, 12 A (50/60 Hz)
23.62" (W) x 25.93" (D) x 18.21" (H)
1.5 kW or less (including options), Performance value: Approx. 1.2
kW
Approx. 70.5 lb.
37.32" (W) x 25.93" (D)