Toshiba e-studio182 Operator's Manual page 104

4 ADVANCED COPYING FUNCTIONS
4
Select "ON", press the [ENTER] button, and then the [CANCEL] but-
ton.
JOB BUILD
The job build function is set and the LCD screen shows as follows:
READY
(JOB BUILD)
5
Place the first job of the originals.
6
Select other copy modes as required, and then press the [START]
button.
Scanning starts. When the scanning is finished, the LCD screen shows as follows:
JOB BUILD
7
Place the next job.
Repeat steps 6 and 7 until all the jobs are scanned.
8
When all the originals have been scanned, select "End job build",
and then press the [ENTER] button.
JOB BUILD
Copying starts.
102 Changing Copy Setting on Each Job - JOB BUILD -
AMS SORT
ZOOM FINISHING
Scan next page
End job build
Scan next page
End job build
ON
OFF
1
EDIT