Toshiba e-studio182 Operator's Manual page 38

1 PREPARATION
Canceling conditions for energy saving mode
The energy saving mode is canceled under the following conditions. After the warm-up has been
completed, the equipment goes into the ready status.
Sleep mode
When any of the [ENERGY SAVER] button, the [START] button and the function switching
buttons on the control panel is pressed
When this equipment is connected to a PC with a USB cable
When printing is performed from a PC connected with this equipment
When the Weekly Timer reaches the time for the power to be turned ON
When Fax data are received
When the Platen Cover (optional) or the Automatic Document Feeder / Reversing Automatic
Document Feeder (optional) is raised
When originals are placed on the Automatic Document Feeder / Reversing Automatic Docu-
ment Feeder (optional)
Super sleep mode
When the [ENERGY SAVER] button on the control panel is pressed
When Fax data are received
When the Platen Cover (optional) or the Automatic Document Feeder / Reversing Automatic
Document Feeder (optional) is raised
If this equipment is connected to your PC with a USB cable, change the setting so that it does
not enter the super sleep mode.
P.132 "Energy Saving Mode Setting"
36 Preparation 1 - Turning Power ON