Toshiba e-studio182 Operator's Manual page 204

6 TROUBLESHOOTING
Phenomenon
The copy image is fogged.
The density level of the copy
image is uneven in a horizon-
tal direction.
The copy image is partially
missing.
The copy image has black
streaks in a horizontal direc-
tion.
202 Before Calling Service Technician
Usual cause
There is a slight gap
between the original glass
and the original.
The copy paper is damp.
The transfer charger wire is
dirty.
The size or direction of the
copy paper and the original,
or the reproduction ratio is
not set properly.
The margin for binding is too
wide.
The scanning area or guides
are stained.
The charger is dirty.
Countermeasure
Lower the Platen Cover (optional) or the
Reversing Automatic Document Feeder
(optional) / Automatic Document Feeder
(optional) fully so that the original will con-
tact with the original glass.
Replace with dry copy paper.
Clean the transfer charger wire.
P.208 "Cleaning transfer charger"
Use copy paper of the same size as the
original or set the reproduction ratio suit-
able to the copy paper size.
Adjust the image shift value again.
P.86 "Shifting Paper to Make Margin -
IMAGE SHIFT -"
Clean them.
P.206 "Daily Inspection"
Clean the charger.
P.207 "Cleaning charger"