Changing Sizes In Horizontal And Vertical Directions - Xy Zoom - Toshiba e-studio182 Operator's Manual

Changing Sizes in Horizontal and Vertical Directions - XY ZOOM -

You can select each reproduction ratio of the horizontal (X) and vertical (Y) directions separately.
1
Place paper in the drawer.
2
Place the original.
3
Select "XY ZOOM" in the copy menu, and then press the [ENTER]
button.
FINISHING
IMAGE SHIFT DUAL PAGE
EDGE ERASE ANNOTATION
PAPER TYPE JOB BUILD
4
Press the selecting button B (–) or C (+) to set the desired reproduc-
tion ratio.
One press of each button increases or decreases the reproduction ratio by 1%. When
you keep pressing either or them, the reproduction ratio also keeps changing. The
reproduction ratio can be set from 25% to 200%.
The direction can be switched with the selecting button A (X/Y).
XY ZOOM
5
Press the [ENTER] button.
The reproduction ratios are set.
6
Press the [CANCEL] button.
The screen returns to the "copy mode" main screen.
Y
X
DUPLEX
X:120% Y: 80%
25% ---- 200%
X/Y -

Changing Sizes in Horizontal and Vertical Directions - XY ZOOM -

Y
2IN1/4IN1
ID CARD
XY ZOOM
JOB MEMORY
+
X
109