Chapter 2 How To Make Copies; Placing Originals; Acceptable Originals - Toshiba e-studio182 Operator's Manual

2 HOW TO MAKE COPIES

Placing Originals

Acceptable originals

Booklets, three-dimensional objects and some types of special media can be placed on the orig-
inal glass, as well as plain paper. When the Reversing Automatic Document Feeder (optional) /
Automatic Document Feeder (optional) is used, a stack of plain paper originals can be automat-
ically scanned one by one.
Setting position
Original glass
Reversing Automatic
Document Feeder
(optional) / Automatic
Document Feeder
(optional)
*1 The automatic size detection function is not enabled for A/B format.
*2 "Special media types" refers to special paper which is not acceptable for the Reversing Automatic Docu-
ment Feeder (optional) / Automatic Document Feeder (optional), such as overhead transparencies or
tracing paper.
*3 Do not place heavy objects (9 lb. or more) and do not press on it with force.
*4 The equipment detects the COMP size original automatically only when the mixed-size copying mode is
used.
*5 Their paper weight should be between 13.3 lb. and 33.8 lb (in both cases of 1-sided and 2-sided).
*6 Some media types may not be used.
*7 ST size originals must be placed in a landscape direction.
Maximum number of originals scanned in one go
Up to 250 original sheets can be scanned at one time. When the number of sheets to be
scanned exceeds 250 or the built-in memory in the equipment becomes full during the scanning
of the copy job, scanning stops and "Count over" or "Memory is full" appears on the LCD screen.
To copy the data scanned so far, select "Print". To delete them, select "Cancel job".
In the following cases, only data deletion is possible. After doing this, perform copying again with
the original divided.
When sort copying for one set is performed
When the magazine sort mode is selected
When non-sort copying is performed (only when the number of sheets to be scanned
exceeds 250)
52

Placing Originals

Type of origi- Maximum
nals size
Plain paper 11.69" x 17.01" LD, LG, LT, LT-R,
Special media
*2
types
Booklets
3-dimensional
objects
Plain paper
Acceptable sizes for auto-
*1
matic size detection
ST-R of standard sizes
LD, LG, LT, LT-R, COMP, ST-R
of standard sizes
Remarks
*3
*4, *5, *6, *7