Tower Model; Installing The Front Cover - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

4.5.2

Tower model

4.5.2.1

Installing the front cover

Figure 18: Installing the front cover (tower server) (A)
Ê Hook the two tabs of the front cover into the notches in the chassis.
Figure 19: Installing the front cover (tower server) (B)
Ê Fold down the front cover (1) until the locking clip on the bottom edge
engage (2).
Ê Insert and slide the ID card into its slot until it locks in place (see figure
on page 56.)
TX140 S2
Upgrade and Maintenance Manual
Basic hardware procedures
12
63