Replacing The Intrusion Switch Cable; Preliminary Steps; Removing The Defective Intrusion Switch Cable - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

Cabling
16.3

Replacing the intrusion switch cable

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver

16.3.1 Preliminary steps

"Locating the defective server" on page 43
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê
"Removing the rack front cover" on page 52
Ê
front cover" on page 56

16.3.2 Removing the defective intrusion switch cable

Figure 210: Disconnecting the intrusion switch cable
308
(tower server)
Upgrade and Maintenance Manual
Hardware: 10 minutes
(rack server) or "Removing the
TX140 S2