Concluding Steps - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

System board and components
Figure 159: Installing the CMOS battery
Ê At a slight angle, fit the new CMOS battery into its socket as shown (1).
V
CAUTION!
Ensure to insert the CMOS battery with the positive pole (label side)
facing up as shown (see close-up).
Ê Fold down the CMOS battery (2) until it locks in place.
Ê Ensure that the locking spring (3) is properly engaged.

14.2.3 Concluding steps

Ê Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
"Reassembling" on page 58
Ê
"Connecting the server to the mains" on page 67
Ê
"Verifying system information backup / restore" on page 79
Ê
"Verifying the system time settings" on page 87
Ê
"Switching on the server" on page 68
Ê
254 Upgrade and Maintenance Manual
TX140 S2