Configure Network Setting - ZyXEL Communications NSA310 User Manual

Enter the administrator user name and password and click Login.
Figure 45 Login
See Section 4.5 on page 62

3.9 Configure Network Setting

Use these screens to change the NSA network settings such as the NSA's name, IP address, subnet
mask, default gateway, DNS, or PPPoE.
Click Configure network setting in the main utility screen to display the following screen.
Figure 46 NAS Starter Utility > Configure network setting
The following table describes the labels in this screen.
Table 8 NAS Starter Utility > Configure network setting
LABEL
NAS Name
Get IP
automatically from
DHCP server
Assign IP Manually
Media Server User's Guide
for more on the administration screens.
DESCRIPTION
Specify a name to uniquely identify the NSA on your network. You can enter up to 15
alphanumeric characters with minus signs allowed but not as the last character. The
name must begin with an alphabetic character (a-z) and is case sensitive.
Select this if the NSA is automatically assigned an IP address from the ISP or a DHCP
server in your network.
Select this if you want to assign the NSA a fixed IP address, subnet mask and default
gateway.
Note: Do not configure an IP address that is already in use in your network. This results to
a network IP address conflict and makes the NSA inaccessible.
Chapter 3 NAS Starter Utility for NSA210
45