Main Nas Starter Utility Screen - ZyXEL Communications NSA310 User Manual

2.4 Main NAS Starter Utility Screen

The main NAS Starter Utility screen displays after you select an NSA in the NSA Seeker screen.
Figure 5 NAS Starter Utility Main Screen
The following table describes the labels in this screen.
Table 2 NAS Starter Utility Main Screen
LABEL
?
Configuration
NAS Seeker
Server Name
IP Address
MAC Address
Firmware Version
Status
Run Initialization
Wizard
Media Server User's Guide
Chapter 2 NAS Starter Utility for NSA221, NSA310, NSA320, and NSA325
DESCRIPTION
Click this to display the utility help.
Click this to run the initialization wizard (see the utility help for details), configure system
settings (see Section 2.9 on page
(see Section 4.3 on page 49).
Click this to use the NSA Seeker screen
different NSA on your network.
This is the server name you configured for the NSA. If you have more than one NSA in
your network, it is recommended that you give each one a unique name for identification
purposes.
This is the current IP address of the NSA.
This is the NSA's unique physical hardware address (MAC).
This shows the version of firmware the NSA is currently using.
This shows whether the NSA is Online, Uninitialized, Unreachable, Configuring, or
Config Failed.
This button displays if the NSA detects an installed hard disk that the NSA has not yet
configured. Click the button to run the initialization wizard (see the utility help for
details).
29), or go to the NSA's Web Configurator login screen
(Section 2.3 on page 21) to find and connect to a
23