Chapter 5 Tutorials
5.6.2 Migrate Button
Do the following steps to create a RAID 1 volume.
Once you install a second SATA hard disk in the NSA, the Storage > Volume screen shows the
1
Migrate button.
Migrate
Click the
2
be created. This may take quite a while depending on how much data you have in the original
volume.
5.6.3 Create an Internal Volume Button
If you do not have an existing volume in the Storage > Volume screen, do the following steps to
create a RAID 1 volume.
In the Storage > Volume screen, click Create an Internal Volume.
1
In the Disk Configuration screen, you can select the storage method.
2
• Type in the Volume Name for your RAID 1 volume. The volume name can be 1 to 31 characters
(a-z, 0-9, " " [spaces], "_", and ".").
• Choose RAID 1 and click Apply.
78
button and you can see the following progress bar. Wait for the RAID 1 volume to
Media Server User's Guide