Chapter 3 NAS Starter Utility for NSA210
Table 6 NAS Starter Utility Main Screen
LABEL
Show the directory
of the NSA
Run the
Initialization
Wizard
Configure network
setting
3.5 Initialization Wizard
Use these screens to set up the NSA for the first time. The wizard will configure the NSA's basic
settings. It also installs the firmware on the hard disk.
Click Run the Initialization Wizard in the main utility screen to display the following screen.
You must log in using an admin account. The default administrator username is 'admin' and the
default password is '1234' and click Next.
Figure 18 Initialization Wizard Welcome
34
DESCRIPTION
Click this to open the NSA's file directory in Windows Explorer. See
42
for details.
Click this to set up the NSA for the first time. See
Click this to change the NSA network settings such as the NSA's name, IP address,
subnet mask, default gateway, DNS, or PPPoE. See
Section 3.5.3 on page
Section 3.5 on page 34
for details.
Section 3.9 on page 45
for details.
Media Server User's Guide