Email Setting - ZyXEL Communications NSA310 User Manual

• Use the Syslog Server Setting screen
and select the categories to include in the log report.

18.4.2 Email Setting

You can enable and configure e-mail alerts from the NSA. In the Report Config screen, click the
Email Setting tab to open the following screen.
Figure 206 Maintenance > Log > Report Config: Email Setting
The following table describes the labels in this screen.
Table 114 Maintenance > Log > Report Config: Email Setting
LABEL
Enable Log Email
Email To
Email From
Email Server
Email Format
Use SMTP
Authentication
User
Password
Password
(Confirm)
After apply settings,
send a test email
Apply
Cancel
Media Server User's Guide
(Section 18.4.4 on page
DESCRIPTION
Click this to have the NSA e-mail log alerts to your e-mail account.
Enter the e-mail address where you want to receive the log alerts.
Enter the e-mail address the NSA uses in the From field of the e-mail header for its log
alerts.
Enter the e-mail server address the NSA uses to send e-mail alerts,
Select the e-mail format you want the NSA to use in its e-mail alerts.
Click this if the e-mail server you want the NSA to use for its e-mail alerts requires a
username and password.
Enter the username for the e-mail server.
Enter the password for the e-mail server.
Re-enter the password to confirm it.
Click this to have the NSA send a test e-mail to the settings you have entered.
Click this to save your changes.
Click this to return to the previous screen without saving.
Chapter 18 Maintenance Screens
326) to enable the syslog server
325