Manual Configuration - ZyXEL Communications NSA310 User Manual

After the NAS Starter Utility finishes configuring the NSA, you can click Show the directory of the
NAS to see the NSA's shares (see
NAS Starter Utility screen (see
Figure 25 Setting the NAS

3.5.2 Manual Configuration

Set up the NSA's basic network configuration first.
1
Figure 26 Setup Network
The following table describes the labels in this screen.
Table 7 NAS Starter Utility > Config
LABEL
Get IP
automatically from
DHCP server
Assign IP Manually
Media Server User's Guide
Section 3.5.3 on page
Section 3.4 on page
DESCRIPTION
Select this if the NSA is automatically assigned an IP address from the ISP or a DHCP
server in your network.
Select this if you want to assign the NSA a fixed IP address, subnet mask and default
gateway.
Note: Do not configure an IP address that is already in use in your network. This results to
a network IP address conflict and makes the NSA inaccessible.
Chapter 3 NAS Starter Utility for NSA210
42) or click Finish to return to the main
33).
37