External Usb Drives; Firmware; File Transfer - ZyXEL Communications NSA310 User Manual

Chapter 20 Troubleshooting

20.7 External USB Drives

The COPY LED is red.
Copying files from a USB device failed. The USB device may not be compatible with the NSA. Try to
save the files onto a computer and then from the computer to the NSA (through the network
connection).

20.8 Firmware

I want to know the firmware version on the NSA.
Go to the Status screen. The Firmware field shows you the current firmware version running.

20.9 File Transfer

I want to transfer my file(s) from my local computer or storage device to the NSA.
• After you initialize your hard disk, you can directly access the folders in your NSA and transfer
files in the same way you transfer files in your local computer:
On your Windows computer, click Start > Run or open a web browser.
1
Enter \\nsa followed by the number of your model (320 for example) or the Server Name you
2
assigned the NSA. This shows you the folders in the NSA.
Use drag-and-drop or copy-and-paste to transfer files over to your NSA.
3
• Use the COPY/SYNC button to transfer files from an external (USB) storage device to the NSA.
• If the file you want to transfer is less than or equal to 2GB, you can use the NSA Starter Utility's
zPilot screen (see
I want to transfer my file(s) from the NSA to my local computer or storage device.
• After you initialize your hard disk, you can directly access the folders in your NSA and transfer
files in the same way you transfer files in your local computer:
352
Section 3.6 on page 43).
Media Server User's Guide