Common Screen Command Buttons; Network Configuration - ZyXEL Communications VANTAGE RADIUS 50 Quick Start Manual

Click a link under MAINTENANCE to see system status, user information, upload
firmware and back up, or restore or upload a configuration file.
Click a link under MANAGEMENT to set up your Vantage RADIUS for remote access
and monitoring connections.
Click LOGOUT in the navigation panel when you have finished managing your device.
The device automatically logs you out if it is left idle for five minutes. If this occurs,
refresh your browser to display the Login screen again and then log back in.

4.1 Common Screen Command Buttons

The following table shows common command buttons found on many web configurator screens.
Apply
Cancel
5 Configuring Your RADIUS Server

5.1 Network Configuration

Wireless clients need to be in the same subnet as the Vantage RADIUS. Clients access the network
through the Vantage RADIUS. Now configure your Vantage RADIUS to access the gateway or
router that provides access to your network. Click ADVANCED and the IP in the main menu of the
Web Configurator to set up network access for your RADIUS server.
Vantage RADIUS 50 Quick Start Guide
Navigation panel
LOGOUT
RESTART/RESET
Click this button to save your changes back to the RADIUS.
Click this button to begin configuring this screen afresh.
7