ZyXEL Communications NSA310 User Manual page 372

Appendix A Setting Up Your Computer's IP Address
The Internet Protocol Version 4 (TCP/IPv4) Properties window opens.
7
Select Obtain an IP address automatically if your network administrator or ISP assigns your IP
8
address dynamically.
Select Use the following IP Address and fill in the IP address, Subnet mask, and Default
gateway fields if you have a static IP address that was assigned to you by your network
administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS
server, if that information was provided.Click Advanced.
Click OK to close the Internet Protocol (TCP/IP) Properties window.
9
10 Click OK to close the Local Area Connection Properties window.
Verifying Settings
Click Start > All Programs > Accessories > Command Prompt.
1
In the Command Prompt window, type "ipconfig" and then press [ENTER].
2
You can also go to Start > Control Panel > Network Connections, right-click a network
connection, click Status and then click the Support tab to view your IP address and connection
information.
372
Media Server User's Guide