The Server Name Screen; The Date/Time Screen - ZyXEL Communications NSA310 User Manual

Chapter 7 System Setting

7.4 The Server Name Screen

Click System Setting > Server Name to open the following screen. Use this screen to configure
your CIFS settings. In this screen you can set your server name and specify if your NSA is a part of
a workgroup.
Note: CIFS cannot be disabled on the NSA.
Figure 85 System Setting > Server Name
The following table describes the labels in these screens.
Table 22 System Setting > Server Name
LABEL
Server Name
Description
Workgroup Name
Prevent NSA From
Being Master
Browser
Apply
Reset

7.5 The Date/Time Screen

Use this screen to select a time zone and a time server from which your NSA can get the time and
date. This time is then used in NSA logs and alerts.
158
DESCRIPTION
Enter a name to identify your NSA on the network in this field.
You can enter up to 15 alphanumeric characters with minus signs allowed but not as the
last character. The name must begin with an alphabet (a-z) and is NOT case sensitive.
Add text here to describe the NSA if the Server Name field is not enough. Use up to 61
characters. You can use all characters except the following: /\:|[]<>+;,?=*"~.
Type your workgroup name in this field. A workgroup is a group of computers on a
network that can share files.These user accounts are maintained on the NSA.
You can enter up to 15 alphanumeric characters with minus signs allowed but not as the
last character. The name must begin with an alphabet (a-z) and is NOT case sensitive.
Select this option if computers in your workgroup are named with non-English characters
(such as Chinese and Russian). When you perform a search in the workgroup, this option
allows you to locate computers named with non-English characters.
Click this to save your changes.
Click this to restore previously saved settings.
Media Server User's Guide