Nsa221 Initialization - ZyXEL Communications NSA221 Support Note

2-bay network attached storage and media server

Hide thumbs Also See for NSA221:

Table of Contents

Figure 5. Installation is finished.

1.2 NSA221 Initialization

After successful installation, click the "NAS Starter Utility". The first screen of NSU

shows the result of NSA Discovery. Click your NSA221's button and click Run the

Initialization Wizard to set up the NAS221. If the connection is green, it means this

NAS is able to be reached by the PC shown in the screen. If the connection is red, this

NAS is not able to be accessed by the PC.

Figure 6. NAS Discovery.

Figure 7. Run Initialization

Then enter the username and password to start the initialization. The default

username is admin and the password is 1234. These two words are case sensitive.

Figure 8. Enter username and password.

Table of Contents