Figure 5-5 Radius Server: Add Remote Radius Server; Table 5-4 Radius Server: Add Remote Radius Server - ZyXEL Communications Vantage RADIUS 50 User Manual

Vantage RADIUS User's Guide

Figure 5-5 RADIUS Server: Add Remote RADIUS Server

LABEL
Add Remote RADIUS Server
Realm Name
IP Address
Shared Secret
Authenticating Port
Accounting Port
Apply
5.6.2 Insert/Modify Allowed IP Addresses
This screen allows you to specify which APs are allowed to communicate with Vantage RADIUS. You
need to make sure you are using the same shared secret used with your APs to configure this screen.
5-12

Table 5-4 RADIUS Server: Add Remote RADIUS Server

Type up to 50 ASCII characters the name of a remote RADIUS server.
Type the IP address of a remote RADIUS server.
Type a key used by the remote RADIUS server to connect to your AP.
Type the port number of a remote RADIUS authentication server. The default port
number is 1812.
Make sure your AP uses the same port number.
Type the port number of a remote RADIUS accounting server. The default port
number is 1813.
Make sure your AP uses the same port number.
Click this button to save changes back to Vantage RADIUS and return to the
RADIUS SERVER screen.
DESCRIPTION
RADIUS Configuration