Appletalk Network Setup Procedures - Canon imageRUNNER C2550 Network Manual

AppleTalk Network Setup Procedures

To print via an AppleTalk network, it is necessary to perform the following
procedures.
1
2
6
3
IMPORTANT
•
If you are using the optional imagePASS, see the manual provided with the optional
imagePASS for more information on the settings (other than for e-mail/I-fax settings).
•
You need to use optional equipment to print via an AppleTalk network. For the equipment
needed, see "Optional Equipment and System Requirements," on p. 1-2.
•
It is recommended that the network administrator perform step 2.
6-2
AppleTalk Network Setup Procedures
Macintosh Network Settings
To specify AppleTalk network settings, enable AppleTalk according to the instructions in the documentation
provided with your Macintosh.
Protocol Settings (See "Protocol Settings," on p. 6-3.)
Specify the protocol settings. To specify the settings, use:
•
The machine's control panel
•
The Remote UI (via a web browser)
•
Canon utilities (NetSpot Device Installer, etc.)
Macintosh Print Settings (See "Setting Up a Computer for Printing," on p. 6-4.)
Specify the settings for each computer you use for printing.