Control Panel And Knobs - GE JGSP32 Use And Care Manual

Porcelain enamel
burner grates should
be washed regularly
and, of course, after
in hot, soapy water and
rinse with clean water.
grates. Dry the grates with a c]oth+on't put them
securely over the burners.
sure they're positioned"

Control Panel and Knobs

It's a good idea to wipe the control panel after each
use. Clean with mild soup and water or vinegar and
water. rinse with clean water and polish
cloth.
50/50" solution of vinegar and hot water wt]rks well.
The control knobs may be removed for easier
cleaning.
right side are in the proper OFF position. When
replacing the knubs. check the OFF position to insure
To keep the cooktop looking iti bes~ wipe up any
spills as they occur. This will keep them from
burning on and becoming more difticult to remove.
As soon as the cooktop is cool, wash the glass
surface with a cloth moistened with warm, soapy
water; rinse with clean water, and dry with a soft cloth.
You can use any liquid household detergent.
Do not use abrasive materials such as metal pads, cleasing powder and
such as bleach or chemical oven cleaners.
To get rid of burned-on food, place the grates
ammonia and let them soak
rinse well, and dry.
Although they're durable, the grates will gradually
lose their shine,
give them. This is due tu their continual exposure to
of time without cookware on the grate. The finish
the heat.
-- —— --- -
dry with a
To remove a knob, pull it straight uff the stem. If a
the knob edge and pull up.
Wash the knobs in soap and water but do not soak.
Avoid getting water into the knob stem holes.
for 30
temperatures.
.
- -
—
Wash,
minutes.
31