GE JGSP32 Use And Care Manual page 17

. oven tcmpertiture is controlled very accurately
using an oven control" system. It is recommended that
you
time given on recipes as a guide to become familiar
with your new oven's performance.
How to Set Your Mnge for Baking
To avoid possible burns, place shelves in the correct
position before you turn the oven on.
1. Press the BAKE pad.
2. Press the INCREASE or DECREASE pad until the
desired temperature is displayed.
The oven will start autf)mtitically. The word '"ON'.
the display will show the changing temperature.
When the oven rcachcs the temperature you set,
will sound.
Oven Shelves
Arrange the oven
-
desired locations
shelf positi(m
depends on the kind
of food and the
As ii general rule.
in
C. See the chart for suggested shelf positions.
Preheating is necessary for good results when baking
and masts, preheating is not necessary. For ovens
without a preheat indicator light or tone, preheat
the Oven Thermostat section. It lists easy
NOTE: When the oven gets hot, the top and outside
surfaces of the range get hot too.
3. Press the CLEAWOFF pad when baking is finished
NOTE: A fan may automatically turn on and off to
To cbnge the oven timpemture during BAKE
or DECREASE pad to get the new temperature.
Angel foti cake
Biscuits or muffins
Brownies
Layer cakes
Pies or pie shells
Frozen pies
Casseroles
Roasting
Preheat the oven if the recipe calls for it. Preheat
means bringing the oven up to the specified
temperature before putting the food in the oven.
To preheat, set the oven at the correct tempcraturc—
selecting a higher temperature does not shorten
preheat time.
Shelf Position
A
B or C
B or C
B or C
B or C
A or B
B or C
A (on cookie sheet)
B or C
A or B
17