To Start Voice Operation - Pioneer AVIC-HD1BT Operation Manual

MAN-HD1BT-SOFTW-EN.book Page 144 Thursday, April 20, 2006 3:47 PM

To start voice operation

No sounds can be out put during
1
Touch VOICE icon.
Navigation screen
Audio screen
Depending on the operating country of the
navigation system, some commands dis-
played in Voice Help may be unavailable.
Available commands are in white and unavail-
able commands are in grey.
When using voice operation for the first
time
Until you are familiar with this system, it is rec-
ommended to stop the vehicle in a safe place and
refer to the commands displayed in the Voice
Help menu (a list of the words you can speak).
When your vehicle is parked with the handbrake
on, see the Voice Help menu and speak voice
command on that menu (except for some case).
Voice Help menu
VOICE icon
When voice command is possible
When voice command is not accepted
144
When you say "Voice Help", the navigation
system pronounces the displayed words that
can be vocalised.
.
If no voice icon is displayed, check to see
whether the microphone is properly con-
nected and turn the power on again.
If there are multiple pages, voice help menu
can be switched by using
the screen. You can also switch the page by
saying "Next page" or "Previous page".
To cancel voice operation
You can cancel voice operation features at any
time by saying "Cancel". After you cancel voice
operation, the map is displayed.
If no command is made in the next 6 seconds
or the recognition fails three times succes-
sively, the voice recognition switches to
standby mode. To reactivate voice operation,
touch VOICE icon.
or on