To Start Voice Operation - Pioneer AVIC-HD3 Operation Manual

MAN-HD3-SOFTW-EN.book Page 146 Wednesday, January 10, 2007 9:33 AM

To start voice operation

No sounds can be output during
1
Touch the VOICE icon.
Navigation screen
Audio screen
Depending on the operating country of the
navigation system, some commands dis-
played in Voice Help may be unavailable.
Available commands are in white and unavail-
able commands are in grey.
When using voice operation for the first
time
Until you are familiar with this system, it is rec-
ommended that you stop the vehicle in a safe
place and refer to the commands displayed in the
Voice Help menu (a list of the words you can
speak). When your vehicle is parked with the
handbrake on, see the Voice Help menu and
speak voice command on that menu (except for
some cases).
Voice Help menu
VOICE icon
When voice command is possible
When voice command is not accepted
146
When you say "Voice Help", the navigation
system pronounces the displayed words that
can be vocalised.
.
If no voice icon is displayed, check to see
whether the microphone is properly con-
nected and turn the power on again.
If there are multiple pages, the voice help
menu can be switched by using
on the screen. You can also switch the
page by saying "Next page" or "Previous
page".
If you say "Back" or touch [Back], the screen
returns to the previous screen.
To cancel voice operation
You can cancel voice operation features at any
time by saying "Cancel". After you cancel voice
operation, the map is displayed.
If no command is made in the next 6 seconds
or the recognition fails three times succes-
sively, the voice recognition switches to
standby mode. To reactivate voice operation,
touch the VOICE icon.
or