Operate The External Unit By Using 1 Key; Key; Operate The External Unit By Using Function 1 - Function 4; Switching The Automatic And Manual Function - Pioneer AVIC-HD1BT Operation Manual

MAN-HD1BT-SOFTW-EN.book Page 126 Thursday, April 20, 2006 3:47 PM
(1) Sending an 8, 2, 4, or 6 command
Touch to operate the external unit.
Operation varies depending on the external
unit connected. (In some cases, some func-
tions may not be used until you touch and
hold the key.)
(2) Sending a band command
Touch to send a band command to the external
unit.
Operation varies depending on the external
unit connected. (In some cases, the external
unit may not respond.)
(3) Sending a 1 key to 6 key command
"Operate the external unit by using 1 key – 6

key"

Page 126
(4) Operate the external unit by using
Function 1 to Function 4 key and Auto/Man-
ual key
"Operate the external unit by using Function 1
– Function 4" Page 126
"Switching the automatic and manual func-
tion" Page 126
Operate the external unit by
using 1 key – 6 key
The external unit can be operated by transmitting
the operating commands set to 1 key – 6 key.
1
Touch [1 – 6 ].
2
Touch desired key ([1 – 6 ]) to operate the
external unit.
To return to the previous screen, touch
[Back].
Operation varies depending on the exter-
nal unit connected. (In some cases, some
functions may not be used until you touch
and hold the key.)
126
Operate the external unit by
using Function 1 – Function 4
The external unit can be operated by transmitting
the operating commands set to Function 1 –
Function 4.
The operating commands set to Function 1 –
Function 4 vary depending on the external
unit.
1
Touch [Function].
2
Touch [Function 1, 2, 3 or 4].
The operation command is transmitted to the
external unit.
Some functions may not be used until you
touch and hold the key.
To return to the previous screen, touch
[Back].
Switching the automatic and
manual function
You can turn automatic and manual function on
or off. You can switch between Auto and Manual
functions of the external unit connected. Initially,
this function is set to Auto.
Operating commands set for Auto and
Manual operations vary depending on the
external unit connected.
1
Touch [Function].
2
Touch [Auto/Manual].
Touching [Auto/Manual] switches between
[Auto] and [Manual].
Operation varies depending on the exter-
nal unit connected. (In some cases, the
external unit may not respond.)
To return to the previous screen, touch
[Back].