Selecting Alternative Frequencies (Af); Using Pi Seek; Using Auto Pi Seek For Preset Stations - Pioneer AVIC-HD1BT Operation Manual

MAN-HD1BT-SOFTW-EN.book Page 99 Thursday, April 20, 2006 3:47 PM
2
Press the TA/NEWS button during a news
programme interruption to cancel the
news programme.
To turn off news programme interruption,
press and hold the TA/NEWS button
again.
The tuner returns to the original source but
remains in standby mode until turning the
news programme interruption off.
You can also cancel the news programme
by pressing the TRK (4/6) button or the
P.LIST (8/2) button while a news pro-
gramme is being received.
You can also turn on or off NEWS function
by touching [NEWS] on the screen.
About interruption Icon status (e.g.
TRFC icon)
The indication of the status icon changes accord-
ing to the situation as shown below.
Indicator Implication
Information interruption is ON, but
you will not receive data since there
is none.
Even if the information interruption
is turned OFF, data is still received.
(You can receive when information
interruption is turned ON.)
The information interruption is
turned ON, and currently receiving
data.
Information interruption is turned
ON, but reception has deteriorated,
so it is searching for another avail-
(Flash) able frequency.
(No display) Information interruption is turned
OFF, and no data is being received.
Selecting alternative frequen-
cies (AF)
If you are listening to a broadcast and the recep-
tion becomes weak or there are other problems,
the navigation system will automatically search
for a different station in the same network which
is broadcasting a stronger signal.
AF is on as a default.
1
Touch (or
Touching the key switches the status between
on and off.
Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
When you recall a preset station, the tuner
may update the preset station with a new
frequency from the station's AF list. (This is
only available when using presets on the
FM1 or FM2 bands.) No preset number
appears on the display if the RDS data for
the station received differs from that for
the originally stored station.
Sound may be temporarily interrupted by
another programme during an AF fre-
quency search.
AF can be turned on or off independently
for each FM band.

Using PI Seek

If the navigation system fails to find a suitable
alternative frequency, or if you are listening to a
broadcast and the reception becomes weak, the
navigation system will automatically search for a
different station with the same programming.
During the search, "PI Seek" is displayed and the
output for audio source is muted. The muting is
discontinued after completion of the PI Seek,
whether or not a different station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the navigation
system can be set to perform PI Seek during pre-
set recall.
The default setting for Auto PI Seek is off.
"Switching Auto PI seek"
).
Page 139
99