Editing Waypoints; Adding A Waypoint - Pioneer AVIC-HD1BT Operation Manual

MAN-HD1BT-SOFTW-EN.book Page 28 Thursday, April 20, 2006 3:47 PM
3
Touch the screen and place the scroll cur-
sor on the point whose detail or entire pic-
ture you want to view. Or zoom in or zoom
out the map scale.
The map around the scroll cursor is zoomed in
or out so you can view the detail or the entire
picture.
4
Touch [Back].
You can return to the previous display.
You can also check the overview by using
the shortcut menu if [Whole Route Over-
view] is selected on the [Short-Cut
Selection].
28

Editing Waypoints

You can select waypoints (locations you want to
visit on the way to your destination) and you can
recalculate the route to pass through these loca-
tions.

Adding a waypoint

Up to 5 waypoints can be selected, and selected
points can be sorted automatically or manually.
1
Touch [Destination] in the navigation
menu, and then touch [Route Overview].
2
Touch [Waypoints].
The waypoint menu screen appears.
3
Touch [Add].
Switch the display to search for points. After
searching for a point, display it on a map, then
touch [OK] to add to the waypoints. (You can
add up to five waypoints in total.)
4
Touch [OK].
A route is recalculated, and "Route confirma-
tion screen" appears.
"Checking and modifying the route"
Page 24
If you set a waypoint(s) in the route to your
destination, the route up to the next way-
point will appear light green. The rest of
the route will be light in blue.