If System Errors Frequently Occur; Returning The Navigation System Completely To The Initial State - Pioneer AVIC-HD1BT Operation Manual

MAN-HD1BT-SOFTW-EN.book Page 161 Thursday, April 20, 2006 3:47 PM
1 1
Navigation functions
Music Library Repeat, Random, Scan, and Pause set-
(LIBRARY) tings
Track data
Play list
Last playback position
FM Preset memory
AM Preset memory
TV Preset memory
REAR Rear Screen setting
SCREEN
Others Picture Adjust
Display Angle

If system errors frequently occur

If system errors frequently occur and the power
to the navigation system turns off, an inappropri-
ate content may have been recorded in the mem-
ory or the hard disk drive. In such a case, the
normal operation may be restored by clearing the
setting values stored in the hard disk drive. For
the contents to be cleared, see the list presented
later.
1
Start the engine.
After a little time, the start-up screen comes
on for a few seconds.
2
Touch and hold the MAP button while the
start-up screen is displayed.
The Clear memory screen appears.
3
Touch [Reset].
4
Touch [Yes].
The setting values stored in the hard disk drive
return to the default or factory settings. After
that, the navigation opening screen appears.
Method 1 Method 2 Method 3
–
– –
– –
– –
–
–
–
–
–
–
Returning the navigation system
completely to the initial state
To return the entire navigation system to the
default or factory settings, initialise the naviga-
tion system in the following order:
1. Press the RESET button on the hard-
ware.
2. Initialise the user data area on the hard
disk drive.
3. Clear the learned data in the sensor.
1
Turn the ignition switch off.
2
Press the RESET button.
3
Start the engine.
After a little time, the start-up screen comes
on for a few seconds.
4
Touch and hold the MAP button while the
start-up screen is displayed.
The Clear memory screen appears.
5
Touch [Clear user information from hard
disk].
This reset operation clears all music data
recorded in the music library. Note that the
cleared data cannot be restored.
6
Touch [Yes].
The user area in the hard disk drive is initial-
ised. After that, the navigation system
restarts.
Method 4
–
–
–
– –
– –
– –
– –
– –
– –
161