Using Hands-Free Phoning; Hands-Free Phoning Overview; Preparing Communication Devices; Volume - Pioneer AVIC-HD1BT Operation Manual

MAN-HD1BT-SOFTW-EN.book Page 67 Thursday, April 20, 2006 3:47 PM

Using Hands-free Phoning

Hands-free Phoning Overview

• For your safety, avoid talking on the phone
as much as possible while driving.
If your mobile phone featuring Bluetooth technol-
ogy, this navigation system can be connected to
your mobile phone wirelessly. Using this hands-
free function, you can operate the navigation sys-
tem to make or receive phone calls. You can also
transfer the phone book data stored in your
mobile phone to the navigation system.
This section describes how to set up a Bluetooth
connection, and how to operate a mobile phone
featuring Bluetooth technology on the navigation
system.
The following description assumes that the
device name of the mobile phone to be con-
nected using Bluetooth wireless technology is set
to [My mobile phone].
Preparing communication
devices
To use the mobile phone featuring Bluetooth
wireless technology on the navigation system,
the Bluetooth unit (ND-BT1) is required.
Precautions on using a mobile phone
featuring Bluetooth technology
By connecting the Bluetooth unit, you can
use the functions described in this manual,
including hands-free phoning or phone book
transfer. To use these functions, the mobile
phone featuring Bluetooth wireless technol-
ogy that you want to connect must have a
supported profile that is the same as the pro-
file for the Bluetooth unit. For the supported
profile, refer to the owner's manual of the
Bluetooth unit.
Please read "Notes for hands-free phoning"
for your reference.
"Notes for hands-free phoning"
When the power of the navigation system
turns off, Bluetooth is also disconnected.
When the system restarts, the system auto-
matically attempts to reconnect the mobile
phone previously connected. Even when the
connection is cut for some reason, the system
automatically reconnects the specified mobile
phone (except for the case where the connec-
tion is cut by the mobile phone operation).
You can open [Phone Menu] directly by pressing
and holding the MENU button.
You can check the signal strength for connec-
tion between your mobile phone and Blue-
tooth unit with [Connection Status] in
[Hardware] Menu.
[Connection Status]
You can set the voice volume and ring volume
with [Volume] in Settings Menu.

[Volume]

Page 77
You can set to mute peripheral sounds during
hands-free phoning.
[Mute Set] Page 137
While your mobile phone featuring Bluetooth
wireless technology is connected,
played on the map.
If you operate using the "CD-SR1" Steering
Remote Control (sold separately), the follow-
ing buttons can be used for operation:
VR ACTIVATION / OFF HOOK button:
Same function as
(Except for [Received Calls].)
Chapter 8
Page 75
Page 79
is dis-
on the screen.
67