Pioneer AVIC-HD1BT Operation Manual page 177

Hdd av navigation head unit
Hide thumbs Also See for AVIC-HD1BT:
Table of Contents

Advertisement

MAN-HD1BT-SOFTW-EN.book Page 175 Thursday, April 20, 2006 3:47 PM
Message
Could not find any available phone.
Bluetooth unit error. It is not possible
to find any cell phones.
Bluetooth unit error. The device
name could not be set.
Registration is not available.
Reading failed.
Calibration failed.
Please refer to the owner's manual.
The HDD is not connected.
Cannot use HDD.
There is no applicable programme.
The HDD cannot be operated due to
excessive heat. Please turn off power
immediately.
When
No available phone is exist on the
surroundings when the system
search the mobile phone featuring
Bluetooth wireless technology for
registration.
If the Bluetooth unit is disconnected
from this navigation system or Blue-
tooth unit carry out another process-
ing when the system search the
mobile phone featuring Bluetooth
wireless technology for registration.
If the Bluetooth unit is disconnected
from this navigation system or Blue-
tooth unit carry out another process-
ing when you change the device
name.
If you try to perform another opera-
tion immediately after failure the con-
nection.
• If you transferred the data from
your mobile phone by a format can
not be received with navigation sys-
tem.
• Disconnection has been made dur-
ing transfer for some reason.
The touch panel calibration has not
been carried out with appropriate
steps.
Failure of the built-in hard disk drive
occur, such as internal electrical
problem or file system error, etc.
Failure of the built-in hard disk drive
occur, such as internal electrical
problem or file system error, etc.
Failure of the built-in hard disk drive
occur, such as internal electrical
problem or file system error, etc.
Hard disk drive can not run due to
high temperature.
What to do
• Turn the target phone's Bluetooth
wireless technology on.
• Check whether your mobile phone
is turned off or not, whether the dis-
tance to your mobile phone is too
far or not.
• Check the connection and retry.
• Establish that connection tempo-
rarily and retry that later.
• Check the connection and retry.
• Establish that connection tempo-
rarily and retry that later.
Wait for a while and retry.
• Select just a suitable item, format
and then retry.
• Connect your mobile phone again
and retry.
Please read the instruction of touch
panel calibration and retry.
Page 162
Consult your dealer.
Consult your dealer.
Consult your dealer.
Park your vehicle to safe place, turn
the ignition switch off and wait until
the temperature inside the vehicle
drops.
175

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents