To Start Voice Operation - Pioneer AVIC-Z1 Operation Manual

To start voice operation

No sounds can be out put during
1
Touch VOICE icon.
Navigation screen
Audio screen
❒ Depending on the operating state of the navi-
gation system, some commands displayed in
Voice Help may be unavailable. Available
commands are in white and unavailable com-
mands are in grey.
When using voice operation for the first
time
Until you are familiar with this system, it is rec-
ommended to stop the vehicle in a safe place and
refer to the commands displayed in the Voice
Help menu (a list of the words you can speak).
When your vehicle is parked with the parking
brake on, see the Voice Help menu and speak
voice command on that menu (except for some
case).
Voice Help menu
VOICE icon
When voice command is possible
When voice command is not accepted
162
❒ When you say [Voice Help], the navigation
system pronounces the displayed words that
can be vocalized.
.
❒ If no voice icon is displayed, check to see
whether the microphone is properly con-
nected and turn the power on again.
❒ If there are too many items to list, voice help
menu can be switched by using
To cancel voice operation
You can cancel voice operation features at any
time by saying [Cancel]. After you cancel voice
operation, the map is displayed.
❒ If no command is made in the next 6 seconds,
voice recognition is canceled and the naviga-
tion system is on hold until the next operation.
Touch VOICE icon to reactivate voice opera-
tion.
on the screen.
or