Operating Your Navigation System With Voice; To Ensure Safe Driving; Basics Of Voice Operation; Flow Of Voice Operation - Pioneer AVIC-HD1BT Operation Manual

MAN-HD1BT-SOFTW-EN.book Page 143 Thursday, April 20, 2006 3:47 PM

Operating Your Navigation System with Voice

To Ensure Safe Driving

• For safety reasons, Voice Help menu
(Voice Recog.Help) is not available while
your vehicle is in motion. To enable this
function, you must stop in a safe place and
put on the handbrake before setting your
route.
Depending on the selected languages, the
interface for voice operation is available in
the following condition.
Swedish, Danish, Norwegian:
English interface is available.
Flemish:
Dutch interface is available.
Portuguese:
Spanish interface is available.
Others:
Selected language's interface is available.

Basics of Voice Operation

Your Pioneer navigation system uses with the lat-
est in voice recognition technology. You can use
voice commands to operate many of its func-
tions. This chapter describes where you can use
voice commands, and also what commands the
system accepts.

Flow of voice operation

You can start voice operation any time even when
the map screen is displayed or audio is operated.
(Some operations are not available.) The basic
steps of voice operation are as follows.
1
Touch VOICE icon to activate voice
operation.
2
Speak a command into the micro-
phone after the beep.
3
When the command is recognised, the
navigation system displays the
response message on the screen, and
pronounces it in some cases.
4
As necessary, repeat Steps 3.
5
The requested operation will be car-
ried out.
The voice operation may not enable for a
minute after the navigation system has booted
up.
If you operate using the "CD-SR1" Steering
Remote Control (sold separately), the follow-
ing buttons can be used for operation:
VR ACTIVATION / OFF HOOK button:
Same function as VOICE icon.
VR CANCEL / ON HOOK button:
Return to previous screen.
Chapter 15
143