17
SERVICE WORK ON THE ENGINE
17.4
Filling up with engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Slide oil sieve into the engine case with the TOP marking facing up.
–
Check the form ring in cover
–
Position the cover. Mount and tighten the screws.
Guideline
Screw, clutch cover
B00226-11
Finishing work
–
Install the front spoiler. (
x
Preparatory work
–
Remove the spoiler. (
Info
Remove the right side only.
for damage and correct seating.
3
M6
p. 81)
p. 78)
152
10 Nm (7.4 lbf ft)