14
ELECTRICAL SYSTEM
14.8
Changing the parking light bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Position the headlight mask. Mount and tighten screws
Guideline
Remaining chassis screws
–
Check that the lighting is functioning properly.
L00429-10
Preparatory work
–
Switch off all power consumers and switch off the engine.
Main work
–
Remove screw
L00433-10
.
1
.
1
M6
10 Nm (7.4 lbf ft)
128