Troubleshooting - KTM 990 SUPER DUKE R EU Owner's Manual

20

TROUBLESHOOTING

Faults
The engine does not turn when the
electric starter button is pressed
Engine turns only if the clutch lever is
drawn
Engine turns although a gear is
engaged
Engine turns but does not start
Engine has too little power
Possible cause
Operating error
Battery discharged
Fuse 1 or 5 is melted
Main fuse burned out
Ignition/steering lock or emergency
OFF switch defective
Faulty safety starting system
Malfunction in CAN bus communica-
tion
Combination instrument defective
Control unit for electric start lock
defective
The vehicle is in gear
Faulty safety starting system
Faulty safety starting system
Coupling of fuel hose connection not
connected
Defect in fuel injection system
Air filter very dirty
Defect in fuel injection system
Action
–
Carry out the start procedure. (
–
Recharge the battery. x
–
Check the closed current.
–
Change the fuses of individual power consumers.
( p. 121)
–
Change the main fuse. (
–
Check the emergency OFF switch.
–
Check the ignition/steering lock.
–
Check the safety starting system.
–
Read out the trouble code memory using the
KTM diagnostics tool. x
–
Check the combination instrument.
–
Check the control unit of the electric start
lock. x
–
Shift the transmission to neutral.
–
Check the safety starting system.
–
Check the safety starting system.
–
Reconnect coupling of fuel hose connection.
–
Read out the fault memory using the KTM diag-
nostics tool. x
–
Change the air filter. x
–
Read out the fault memory using the KTM diag-
nostics tool. x
163
p. 50)
( p. 116)
x
p. 119)
x
x
x
x
x
x