14
ELECTRICAL SYSTEM
14.11
Changing the tail light bulbs
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Remove the seat. (
Main work
–
Carefully pull bulb sockets
L00432-11
–
Remove bulb
–
Position a new light bulb in the holder.
Tail light (WR5W/socket W2.1x9.5d) (
–
Carefully position the sockets with the bulbs into the holder in the tail light.
L00437-10
p. 82)
out of the holder.
1
.
2
p. 179)
132