14
ELECTRICAL SYSTEM
14.7
Changing the high beam bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Position the spring bar.
–
Connect plug-in connection
–
Mount protection cap
L00446-10
–
Position the headlight mask. Mount and tighten screws
Guideline
Remaining chassis screws
–
Check that the lighting is functioning properly.
L00429-10
.
4
.
3
M6
.
1
10 Nm (7.4 lbf ft)
125