14
ELECTRICAL SYSTEM
14.9
Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Push the headlight mask spoiler slightly to the side.
–
Pull out lamp socket
–
Remove bulb
–
Position a new light bulb in the holder.
Parking light (W5W/socket W2.1x9.5d) (
–
Carefully position the socket with the bulb into the holder in the headlight.
L00434-10
–
Mount and tighten screw
–
Check that the lighting is functioning properly.
L00433-10
.
2
.
3
.
1
p. 179)
129