ELECTRICAL SYSTEM
Checking the headlight setting
13.15
A
0 0 A
Adjusting the headlight range
13.16
–
Park the vehicle on a horizontal surface in front of a light-colored wall and make a mark
at the height of the center of the low beam headlight.
–
Make another mark at a distance of
Guideline
B
0 0 B
Distance
B
–
Park the vehicle at a distance of
beam headlight.
Guideline
400609-10
Distance
A
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
Preliminary work
–
Check the headlight setting. (
under the first mark.
B
5 cm (2 in)
vertically in front of the wall and switch on the low
A
5 m (16 ft)
p. 145)
p. 145)
145