ELECTRICAL SYSTEM
Changing the high beam bulb
13.10
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preliminary work
–
Switch off all power consumers and the engine.
–
Remove the front side cover. (
–
Remove the headlight mask with the headlight. (
Main work
–
Remove rubber cap
100594-10
p. 80)
and disconnect plug-in connector
1
p. 136)
.
2
139