Changing The Abs Fuses (990 Adventure) - KTM 990 ADVENTURE EU Owner's Manual

ELECTRICAL SYSTEM

Changing the ABS fuses (990 Adventure)

13.5
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
Two fuses for the ABS are located under the right underride guard. These fuses protect the return pump and the hydraulic unit of
the ABS. The third fuse, which protects the ABS control unit, is located in the fuse box.
Info
A defective fuse can be identified by the burned-out fuse wire
A reserve fuse
The main fuse protects all power consumers of the vehicle.
–
Install a new main fuse.
Fuse (58011109130) (
–
Check that the electrical equipment is functioning properly.
–
Mount the protective cover and place the starter relay onto the holder.
Tip
Place the spare fuse in the starter relay so that it is available if needed.
Follow-up work
–
Install the right underride guard. (
–
Set the clock. ( p. 29)
is located in the starter relay.
4
p. 197)
p. 99)
131
.
A